Dual-action 9cc 0.2mm Mini paint sprayer Gun for all decor painting

Double-action technology:

Control of the paint and quantity of air with a finger, allows users to determine the quantity of air and fluid released. Provides superb atomisation & incredible control. allows you to control paint and quantity of air with a finger as you want. Made on light weight die cast to make it easy to handle and it gives strong power to spray paint.

Applications:

It sprays an entire range of stipple effects from very fine to coarse textures. Perfect for airbrush, model painting, decor painting and painting car, bicycle, bike, airbrush tattoos, nail design and much more. Great tool for Commercial arts, illustrations, photo retouching, hobby and crafts. Package includes needles and nozzles in 3 sizes: 0.2mm/ 0.3mm/ 0.5mm, to better satisfy all your needs.

Parameters:

• Material: Copper
• Switching Mode: Dual-Action
• Nozzle Diameters: Airbrush on 0.2mm, parts 0.3mm and 0.5mm.
• Standard Nozzle Diameters.: 0.2mm.
• Cup Capacity: 9cc.
• Working Pressure: 15-50psi.
• Air hose: 1.8M

How To Spray:

1. Fill fluid in the cup after thinning appropriately.
2. Hold the airbrush lightly in you hand.
3. By pressing the main lever, a stream of air emerges. Then draw it backward gradually for Color atomization.
4. The spray pattern is in accordance with the distance between a work surface and a air brush.
5. For fine line spray, remove the needle cover and hold the air brush near a work surface.

Kindly Note:

• Please debug the airbrush to the best state, and then use a clean water test and atomization before using it for a proper painting.
• The 0.2mm needle and 0.2mm nozzle are installed in the airbrush gun already.
• Please use the stability, if dropped on the ground, may affect the use effect, or damage.
• After use, please clean the airbrush, avoid clogging, effect the next time you normally use. It will be better to clean with water thinner like Alcohol after water paint. oil paint should be cleaned with oil thinner like ethyl acetate
• In order to protect the item well, a professional person to change needle and nozzle will be recommend.

Maintenance:

1. Empty the fluid cup and wash with water or solvent by a brush.
2. Refill cup with water or solvent, then block the needle cover with a finger and spray.The air flows backward into nozzle to clean the paints remained the air brush.

Problems & Solutions:

• Paint nozzle leak or abnormal condition of spray.

1. Possible reason: The needle is bent or distorted. Solutions: change accessories/parts.
2. Possible reason: Poor connection of nozzle and needle. Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net, then use the needle touch the nozzle back and forth; screw tightly the needle chucking net.

• Could not spray or bad atomization.

1. Possible reason: nozzle clogged. Solutions: clean the nozzle by solvent.
2. Possible reason: the needle chucking net is loose. Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back, repeat this action a few times ;screw tightly the needle chucking net.
3. Possible reason: operation button doesn’t work. Solutions: Open the Standard-Handle Adjusting, loosen the needle chucking net; pull out the needle and put it back, repeat this action a few times ;screw tightly the needle chucking net.

Package List:

• 1 x Airbrush Gun
• 1 x Air Hose
• 1 x Oil/Water Separator
• 1 x Nozzle Wrench
• 1 x Eye Dropper
• 1 x 0.3mm Needle
• 1 x 0.5mm Needle
• 1 x 0.3mm Nozzle
• 1 x 0.5mm Nozzle
• 1 x 0.5mm Nozzle Cap
• 1 x Fast Joint

Please note the Air Compressor is not included with the product. Don’t worry, you can get one here.

• Air Compressor: Mini Airbrush Air Compressor with Airbrush Holder and Air Hose
• Extra Air filter: In-line Moisture Trap Air Filter for Mini Airbrush Spray Gun
• Extra Air Hose: 1.8M 1/8″ Nylon Braided Airbrush Air Hose Pipe